How to choose electronic security systems to protect a country house.
How to choose electronic security systems to protect a country house.
Electronic security systems
From the creators and designers of electronic security systemsThere are two main goals that should be achieved after installation. Firstly, this is the creation of several levels of protection at the facility, and secondly, — ensuring the proper level of protection that prevents criminal actions by an intruder. It is country houses that are especially often subject to this type of crime, such as burglary. Some people naively believe that by installing burglar-proof doors, they will protect themselves and their property one hundred percent, but this is not true. Even if these doors are equipped with super-modern biometric locks, there is no guarantee, a set of measures is needed. Competent specialists, before starting work, conduct an on-site analysis of the proposed installation site of security systems, during which an assessment of possible risks and threats is carried out. When installing electronic security systemsin a country house, cottage, etc., specialists first of all take into account the fact that the facility is located far from the city. This requires a higher level of reliability from the equipment, which is achieved, in particular, by minimizing the amount of equipment installed. In this case, it would be best to opt for equipment units of the same type, from the same manufacturer. It would be especially good to take into account the possibility of interchangeability of some equipment elements.
Automated security systemsfor the home should consist of several functionally independent parts that do not create difficulties and obstacles in the process of their installation, adjustment and use. When designing, it is best to provide for the maximum technical capabilities of the equipment, even if this may seem unnecessary at first. Thus, you should choose a structure of automated security systems that provides for the possibility of its problem-free expansion and addition of new equipment elements.
Home security systems
Based on the experience of the past few years, when installing home security systemsglass break sensors are installed in all rooms with windows. Magnetic contact sensors for opening are installed on the door. In such a facility as a country house, it is quite difficult to lay signal loop equipment without violating the integrity of the interior. Therefore, you should opt for the open method of laying loops and cables. There is also an economical option — the use of internal motion sensors in all rooms of the house. However, in this case, the facility can be taken under protection only when there are no people in the house. As a foundation home security systems it is most reasonable to create a closed security zone consisting of IR motion sensors on the outer surface of the outer walls, along the outer perimeter of the house. Here, the best option is active beam sensors with an IR beam function. This will ensure security even in the absence of the owners, preventing an intruder from breaking into the house. To enhance security, motion sensors are also installed inside the house.
For perimeter protection, it is best to use sensors together with a video surveillance system. Here, it is also important to consider the size of the perimeter zone that you have: if the area is at least 0.5 hectares, it is advisable to ensure that there is a security post that will receive information from the cameras. Video surveillance equipment should be placed on access roads, entrance gates and entrance doors. At the same time, the monitored areas should be well lit at night.
GSM security systems
Separately, it is necessary to consider GSM security systems, which have entered the security systems market relatively recently. They are distinguished by the fact that they use a cellular communication channel to transmit alarm signals. Such systems are used in almost all types of facilities, and they are the best choice for protecting a country house. The transmitted signal will reach its target in any GSM distribution zone. Separately, it is necessary to mention the convenience during installation: gsm security systemduring installation, it does not require the installation of cable lines or telephone channels. The signal is sent to the security console, as well as to the owner's mobile phone, who can control the alarm system independently at his own discretion. At the same time, as practice shows, the monthly costs of providing such security are low. The equipment includes a central unit and security sensors. The central unit monitors the functioning of the system and the state of the sensors, receiving information from the sensors. Sensors of the gsm security system react to changes in the external situation, for example, opening of doors, windows, movement of people, smoke, temperature increase, gas leakage, flooding, etc. You can choose the sensors themselves with a set of specific functions depending on the required tasks and the type of protected object/premises. Since a radio channel signal transmission system is used, the installation of sensors is carried out without violating the quality of the interior and takes only a few hours.