ALLEN company catalogue.

Received in April 1999.

ALLEN Catalog
(volume 1)

Established in 1948 to develop and manufacture explosive ordnance disposal equipment and search equipment for the UK Ministry of Defence, Allenhas now expanded its product range and is ready to offer a wide selection of the latest equipment for the disposal of explosive devices, homemade explosive devices, as well as for the search for drugs, explosives and contraband.

This catalog presents the best products that can be purchased in each of these areas; it is well illustrated and provided with a detailed description of technical parameters to help make the necessary choice.

In addition, our specialists are ready to provide additional information and organize a demonstration of our products and their testing.

Allen has worked closely with the British Army, Police, Customs and Excise and Immigration Service in the area of ​​explosive and improvised explosive device clearance for many years and can recommend equipment that has proven its effectiveness.

Contents

Search Mirrors
Lamps and Torches
UV Lamps
Search Kits
Search endoscopes
Rigid endoscopes
Flexible search endoscopes
Insertion tool for endoscopes
Contraband detectors
Drug search kit
Non-linear locator
X-ray systems
Explosives detectors
Drug detectors
Search and Sealing Tools
Quick Access Tool
Mine Detection
Metal Detectors Used in Defusing Explosive Devices
Electronic Stethoscopes
Non-Magnetic Tools
Fishing Line and Hook Kits Used in Defusing Explosive Devices
Suit Used in Defusing Explosive Devices
Improvised Explosive Device Destroyer
Frequency Jammers
Letter Bomb Detectors
Bomb Explosion Suppressors
Metal Detectors

Search Mirrors

Telescopic Handle

The telescopic handle, which extends to a great length, can be equipped with a number of mirrors and is available both with a rubberized flashlight with 2D batteries attached to it, and without a flashlight.

The six section handle extends to 1400mm and collapses to 350mm for easy carrying. Both models have loops for added safety.

This handle can be fitted with all of the Allen interchangeable mirrors shown on this page. The ball and socket joint on the mounting portion of the mirror allows for adjustment of the viewing angle.

This versatile mirror system provides a convenient method of viewing hard to reach areas on ships, in cars and in buildings.

Weight without light: 526g

Weight with flashlight (including battery): 1050g

Supplied without mirrors, which must be ordered separately.

Long fixed-length handle

Weight:

• with flashlight 955g
• without flashlight 450g

Length: 900mm

Long handle with mirror fixed at 45 degrees, supplied both with and without splash-proof flashlight. 2D batteries serve as power sources for the flashlight. Both models are equipped with safety loops for carrying, the flashlight is equipped with a spare bulb (in the housing cover).

The handle can be supplied with any Allen standard or protected mirrors, these should be ordered separately.

Short handle with flashlight

The short, durable handle for the mirror is equipped with a splash-proof rubberized flashlight powered by a 2D source. The mounting device for the mirror provides fixation at an angle of 45 degrees. Any Allen mirror, standard or protected, can be attached to it (see the figure on page 2).

In addition, there is a safety loop for carrying and a spare bulb (in the cover of the flashlight body).

This mirror system is ideal for general security purposes and viewing under moving objects.

Mirrors must be ordered separately.

Weight 835g, overall length 470mm.

Interchangeable Mirrors

A wide range of mirrors are available that can be attached to telescopic and fixed handles. All mirrors are framed with lightweight black polypropylene frames and bushings that are secured with a nut.

Standard Mirrors

Includes two round mirrors with flat glass, diameters 38 and 64 mm, a rectangular mirror with flat glass 64 x 114 mm and a round mirror with convex glass, providing a larger field of view.

You can also purchase a flat acrylic mirror, diameter 140 mm, for use in places where glass breakage is dangerous.

Protected mirrors

Two standard glass mirrors with a thick rubber frame to protect against rough handling. Available in flat mirrors with a diameter of 64 mm and convex mirrors with a diameter of 140 mm.

Trolley-type under-vehicle search mirror

A large convex mirror with a fluorescent light mounted on casters for searching underneath a moving object. The mirror provides a large field of view, and the articulated handle can be tilted toward the ground to allow the mirror to be pushed as far under the moving object as possible.

Lighting is provided by a 12-watt high-output fluorescent lamp with a 2-meter extension cable; this lamp can be used independently as a search lamp. There are 3 models available:

Model powered by type D batteries: power is provided by 10 type D batteries installed in the handle and providing 8 hours of continuous operation. Type D batteries are included.

Externally powered model: it is equipped with an 8-meter power cord, connected with alligator clips to an external power source of 12V DC, with a current of 1A.

Rechargeable model: it is equipped with 10 Ni-Cad batteries, a separate charger and a connecting cord.

Main technical parameters: polycarbonate mirror, convex, size 330 x 65 mm; 2 6-watt fluorescent lamps in a splash-proof acrylic housing with a handle and a 2-meter extension cord with a clamp for attaching to a trolley; 950mm long aluminum articulated handle and a 3-position switch: off, safety and instant on.

A search mirror that fits in your pocket

Compact and lightweight

A compact mirror for searching under a moving object, which can be carried as an additional means of ensuring personal safety.

Consists of a convex mirror, a telescopic handle and a miniature flashlight. Folds up, becomes flat when folded, fits in a pocket or handbag, weighs only 290g.

This convex mirror is adjustable in tilt and provides a wide field of view. The unique telescopic handle extends up to 460mm and has high rigidity to ensure image stability. The built-in flashlight can be used with both the open and closed mirror.

Dimensions when closed: 155 x 90 x 20 mm.

The kit includes 2 AAA batteries and a spare lamp (in a special compartment).

Lightweight mirror for searching under a vehicle

The mirror has a long handle, allowing inspection under moving vehicles. This durable convex mirror, made of ABS (plastic), provides a wide field of view, which is well illuminated by a built-in 55-watt tungsten halogen lamp. Power is provided either by a battery pack or by batteries located in the waist belt. The mirror is hinged, which allows you to adjust the viewing angle.

The mirror is equipped with a handle with a holder and a hand support, it is light and maneuverable, easy to operate with one hand.

Technical parameters:

Search mirror: aluminum rod 1 m long, convex mirror made of ABS measuring 152 x 213 mm, with an external cord 2 m long, a handle with a holder and a hand support, weight 4.8 kg

Battery packaging: 12V, 8A-hours, lead-acid, handle and shoulder strap.

Belt — belt with batteries: 12V, 8A-hours, lead-acid, adjustable belt length, weight 4.8 kg.

Charger: 12V DC output, adjustable, powered by 110/120 or 220/240V AC.

Please state 110 or 230V AC when ordering. current.

Lamps and hand-held lanterns

Search light Dragon — 30W, 50W, 100W

Weight 3kg

Dimensions (length x depth x height): 273 x 162 x 200mm.

Model T6 (30W)

Powerful rechargeable search light with a sealed 30-watt tungsten halogen lamp.

It has a Ni-Cad battery and an automatic protection circuit that turns off the lamp before the battery is completely discharged. This protects the battery from damage. The flashlight is equipped with a built-in charger, powered by a 12-volt car cigarette lighter, allowing you to keep the product always on charge until you need it. The durable PVC housing is waterproof and dustproof in accordance with the IP65 environmental standard and is extremely reliable in operation.

Accessories include a bracket for storage in a car or on a wall, a charger for 110 and 230 VAC and a polycarbonate protector for the lens.

IP65

IP65 — International standard regulating general protection against dust and against the effects of low-pressure water jets (low penetration is allowed) when exposed from all directions.

Models T-12 (50W/100W)

Two rechargeable search lights equipped with a 50 or 100-watt tungsten halogen sealed beam-forming lamp. Both models have automatic battery protection circuits, low battery alarms and are enclosed in durable PVC housings, water and dust resistant in accordance with IP65/

All chargers are sold separately and include 12 and 24-volt automotive models and 110 and 230-volt AC models.

The kit includes an additional battery pack that doubles the run time of the light, a 5-meter power cord for 120-volt vehicle power, a 14-meter power cord for 24-volt vehicle power, a protective lens cover, a beam diffuser, and a bracket for hanging in the vehicle or on a wall. A set of infrared filters for covert observation at a distance of 25, 400 and 800 m can be purchased additionally.

Maglite type lights

• 11 Watt Tungsten Halogen Lamp
• Adjustable beam from spot to wide beam
• Anodized aluminum body
• Sealed self-cleaning pushbutton switch
• Water and shock resistant
• Battery life up to 1000 hours

The flashlight is supplied with a battery pack (6V, Ni-Cad), a plug-in charger from 230V AC, a 12V adapter and cigarette lighter, and a charger support with a mounting bracket.

Maglite flashlight with D batteries

A set of high-quality flashlights in durable anodized aluminum housings with non-slip handles. All of them are shock- and water-resistant and equipped with a reliable switching mechanism. They have “ultra-bright” krypton lamps and reflectors with a variable focal length, which allows you to adjust and get either a light spot or wide illumination.

These professional flashlights are manufactured in accordance with special military standards and provide a long service life.

• Flashlight with 2 D-cell batteries: 250 x 57 mm, weight 483 g
• Flashlight with 3 D-cell batteries: 310 x 57 mm, weight 555 g
• Flashlight with 5 D-cell batteries: 435 x 57 mm, weight 611 g

All flashlights come with a spare krypton bulb housed in the lid. Batteries not included.

Maglite type flashlights

Two professional flashlights

• Equipped with ultra-bright krypton lamps
• Aluminum body
• Adjustable from a light spot to a wide beam of light
• Water- and shockproof

Flashlight with AA batteries: 140 x 25 mm (diameter); weight 105 g

Flashlight with batteries C: 230 x 57mm (dia. 0; weight 400G

Accessories for Maglite Flashlights

Traffic Control Rods: Red, Yellow, and White Translucent Attachments. Matches D-cell flashlights to create a colored traffic control rod.

Belt Holsters: Leather holsters for flashlights with AA or D batteries and a nylon covered holster for flashlights with AA batteries. Two simple leather belt holsters with ring diameters to fit flashlights with C or D batteries.

Pistol Type Mounts: Sizes to fit flashlights with AA batteries (Bisley type).

Accessory Kit for Flashlights with D batteries: Includes: 3 color filters with mounting hardware and a mounting bracket for the flashlight

Floodlight

For harsh environments — IP65 rated

Powerful rechargeable floodlight, effective up to half a mile; can be focused to close range. Dust and water resistant to IP65; floats in water with the beam facing up

Rechargeable, long-lasting batteries cannot be overcharged or damaged if left uncharged and last for 3,000 charge cycles.

Available in 2 models, each with a 4- or 8-hour battery life. Both models feature 0.3A, 6V tungsten halogen lamps, a built-in charger, a carrying strap, and a charging cord.

Head-mounted flashlight

Provides hands-free operation

Headlamp; battery operated;. The lenses rotate on a hinge; there is a beam adjustment from a light spot to a wide light stream. Designed to provide hands-free work without any wires. Convenient, lightweight, reliable. Made of polycarbonate and acetate rubber. The 20 mm wide headband is adjustable in length and is attached to the safety helmet using a special clamp (the clamp is optional). A carrying bag is included. Uses four 1.5-volt AA batteries (not included).

Fluorescent handheld torch

12W, durable metal body

• length=195mm
• width=68mm
• height=242mm
• weight=2.9kg

A bright lamp for review and inspection purposes in a durable steel housing with a strong acrylic window. Equipped with two fluorescent tubes, it provides bright illumination over a large area.

Two models are available. The D-cell model operates for 12 hours before replacing the batteries and is equipped with eight D-cell batteries.

with a long service life. The rechargeable model is equipped with a sealed lead-acid battery and works for 4 hours before needing to be recharged. Weight (A33D) 3.2 kg, weight (A33R) 3.8 kg

The charger increases the battery life with an adjustable output; it is equipped with a power cord and an extension cord. The charger must be ordered separately.

For visual search, see the SKM Search Kit, which provides most of the basic visual search applications.

Portable Illuminator

Rechargeable Battery

Battery-powered portable illuminator provides 12 hours of continuous emergency illumination.

The main unit consists of a waterproof housing for a lamp with a 2D fluorescent lamp; the housing is mounted on a battery. The swivel mount allows for adjustment of the lighting angle. The illuminator complies with IP65 and has waterproof cables and connectors.

The lamp head is connected to the battery with twisted wires, can be removed and, if necessary, used manually or installed in a specified location.

As an option, the lamp head can be mounted on the top of the mast (optional), raising the lamp to a height of 1.2 m. The mast is attached to a socket on the battery block and can rest on an extendable tripod for stability.

2 hours of battery charge provide 4 hours of operation, and 5 hours of charge give up to 12 hours of operation.

The main unit has dimensions of 267 x 248 x 400 mm and weighs 8 kg. The total height with the mast is 1.6 m.

The main illuminator with rechargeable battery is supplied with a separate charger from the AC power supply of 110 or 230 V.

High risk area

Torches protected to BASEEFA Exe IIT6, DOT Class III, BS 4683 and IP67.

Environmentally protected to IP67

A range of torches designed to provide safe use in harsh environments and approved for use at a range of hazardous pressure levels. Certified by the BASEEFA Health and Safety Committee to BS4683 Part 4, 1973.

The flashlights are molded in antistatic plastic, the lenses are covered with armored glass and equipped with captive screws on the front and back covers. They have high shock and chemical resistance, withstand temperatures from -40 to +80 degrees Celsius, and are protected from water and dust in accordance with the IP67 standard.

Flashlights with two and three elements of direct light and flashlights with two elements of side light at a right angle are available, the latter with a waist belt attachment. The rear covers are equipped with suspension rings moved back and two spare bulbs. A safety loop for attaching to the hand is available.

Two-element with direct light: 205 x 60 mm; PR6 bulb. 2.5 V; 0.3 A

Three-element with direct light: 265 x 60 mm; PR6 bulb. 3.5 V; 0.3 A

Two-element with angled light: 202 x 80 mm; PR6 bulb. 2.5 V; 0.3 A

To ensure compliance with safety standards, flashlights must be operated with zinc-carbon type “D” batteries. Comes with batteries of this type.

IP54 and IP67

IP is an international standard used to measure the protection of enclosures against intrusion.

IP65 is an international standard that regulates general protection against dust and against the effects of low-pressure water jets (low penetration is allowed) when exposed from all directions.

IP67 means that the housing is completely protected against dust penetration and protected against the effects of liquid when immersed in it to a depth of 1 m.

High-risk area

Lamps protected in accordance with BASEEFA Eex e ib iic T5, BS5501, EN50 014, EN50 019, EN50 020

Protection from environmental influences in accordance with IP67

In the picture: dimensions 265 x 88 mm, weight with batteries 0.83 kg.

Flashlights for use in harsh conditions in high-risk areas, with very high reliability. The body and front cover are made of die-cast aluminum alloy and covered with nylon to prevent sparking due to friction. Reinforced lenses, mechanical lens protection, labyrinth switch to protect against accidental activation. A loop is provided for safe carrying.

The flashlight is equipped with a 3.5V, 0.3A lamp and three zinc-carbon “D” batteries. Please note that in order to comply with safety standards, it is necessary to use zinc-carbon batteries.

UV lamps

Pocket ultraviolet (UV) lamp

Lightweight UV lamp with plastic body and acrylic window.

Equipped with one 4-watt fluorescent lamp of darkened light. Powered by four AA batteries (not included). Also supplied is a safety marker pen with colorless ink that fluoresces under UV light.

Dimensions: 57 x 19 x 170 mm. Weight (with batteries): 180g.

12W UV lamp, rechargeable

Heavy-duty housing

A long-wave UV lamp, battery or rechargeable, in a rigid metal housing with a durable acrylic window. It is equipped with two 6-watt darkened fluorescent lamps, 225 mm long, whose maximum emission is at a wavelength of 365 nm.

The model with “D” batteries requires 8 batteries and provides 10 hours of continuous operation before replacing the batteries. The rechargeable model is equipped with a 12-volt, 4.5 Ah lead-acid battery, providing 4 hours of operation before recharging.

A separate charger provides 12-volt adjustable output voltage. Adjustment helps to extend the life of the battery.

Dimensions: 240 x 190 x 75 mm

Weight (model with “D” batteries): 3.2 kg.

Weight (model with rechargeable battery): 3.8 kg.

12W UV lamp with rechargeable battery

The dimensions shown in the figure are: 250 x 85 x 130 mm

A source of long-wave (365 nm) UV radiation, intended for use in drug detection and detection of safety markers.

Equipped with two 6-watt darkened UV lamps, a sealed lead-acid battery and a built-in charger from the 230V AC network. When fully charged, it provides 3-4 hours of operation. Lightweight plastic case Charging time — 20-24 hours.

UV lighting lamp for narrow beam light, 100W

Powered by batteries

Two types of long-wave UV narrow-beam illumination lamps, made in a durable metal housing with mechanical protection of the lamp. Both lamps are equipped with a narrow-band filter to ensure high purity of UV radiation at a wavelength of 365 nm without contamination by white light, as well as a rigid steel case for carrying and storage with protective glasses. Used for work at a crime scene or when searching for drugs.

The model providing high-intensity illumination with AC power supply is equipped with a 10-watt mercury vapor lamp (Philips-type), providing a power density of 3 mW/cm2 at a distance of 630 mm.

The medium intensity, DC powered model features a 100 Watt Xenon lamp producing 0.7mW/cm2 at 630mm and is supplied with either coiled leads for connection to an external battery or a lead acid battery, a shoulder strap and a charger.

UV table lamp

Small lamp height

An attractively styled desk lamp for use in currency authentication. Also used to highlight security markers and fluorescent marks on credit cards, driver's licenses, ILO certificates and other documents. Emits low-intensity ultraviolet waves of type «A» (365 nm).

The body is made of molded plastic with a 4-watt UV lamp. Comes with a cord with a plug.

Dimensions: 220 x 40 x 93 mm. Power supply from AC 230V.

Search Kits

Miniature Inspection Kit

A set of miniature mirrors, light probes and magnifying glasses to facilitate the internal inspection of suspicious cases and containers through small openings with minimal impact on the object. Designed for use in reconnaissance and destruction of explosive devices, in ensuring security and searching at crime scenes.

The kit includes two handles with batteries and a whole range of light probes with a diameter of 3 mm and mirror bushings with a diameter of 9.5 mm. Light probes can be an up to 760 mm long, among them there are models that after bending retain a given bending shape, as well as insulated light guides in acrylic for examining the internal parts of electrical equipment. The kit includes a magnifying glass for 8x magnification.

The kit is supplied in a protective portable case with batteries and spare bulbs.

A miniature light probe helps in examining suspicious items and packages.

All of the following equipment attaches to the battery-powered handle

A fixed mirror that connects to 8mm diameter light probes:

Mountable mirrors, extensions and accessories that work with 14mm diameter light probes:

Optical periscope with illumination

The portable periscope with illumination is ideal for searching under the roof and behind suspended ceilings. The periscope is lightweight and can be held in your hands or mounted on a regular photo tripod for extended observation. A powerful light source (75W) can be attached to the end of the periscope to provide bright illumination; the illumination range is more than 50m. A wide range of battery packs is available.

The periscope is supplied separately or as a complete set with a light source, battery pack and charger in a portable case.

Technical parameters

Periscope (SP86): diameter 38mm, length 864mm, lenses with achromatic coating, field of view 40 degrees, field of view 90 degrees, aluminum rod, standard thread for mounting on a photo tripod, weight 1kg, supplied with a carrying case.

Power Source (SPLS): 12V, 75W, tungsten halogen lamp, aluminum housing, diameter 51mm, length 51mm, power cord 2m, weight 333g.

Lightweight Battery Pack (SPBP): 12V, 1.6A-hours, sealed lead-acid batteries, rechargeable, leatherette casing with belt clip, 1kg. Powers a 75W light source for 20 minutes.

Battery Strap (RBB): 12V, 8A-hour, sealed lead/acid batteries, rechargeable, 4.5kg, adjustable strap length. Powers a 75-watt light for 90 minutes.

Battery Pack (RBP): 12V, 8A-hour, sealed lead/acid batteries, 4.8kg, shoulder strap. Powers a 75-watt light for 90 minutes.

Charger (SPTC): Regulated 12V output, operates on 110 or 230VAC.

Periscope Kit (SP86K): Contains periscope (SP86), light source (SPLS), lightweight battery pack (SPBP), charger — all in a special case.

Search endoscopes

Sets: endoscope and mirrors.

Two portable search sets are offered for searching in inaccessible areas of buildings, ships, cars. Each set contains a side-view endoscope with a rechargeable battery pack and a charger.

The larger kit also includes a telescopic handle for the mirror, a short handle for the mirror with a flashlight, and a set of interchangeable screw-on mirrors, including two large round convex mirrors, a small flat round mirror, and a rectangular mirror. Each kit comes with a durable plastic carrying case with a protective foam lining.

Side View Endoscope

Portable endoscope with side view for searching in hard to reach places through holes and cracks with a diameter of 10 mm. Bright 10-watt tungsten halogen lamp at the end of the endoscope allows for research at a distance of up to 1.5 m. Power is supplied by batteries, providing 2 hours of continuous operation when fully charged.

Mirror with telescopic handle

A mirror with a telescopic handle that can be extended to 1400 mm and retracted to 350 mm during storage allows you to view remote areas. The mirror set includes a convex mirror with a diameter of 140 mm to provide a wide field of view, and a smaller mirror with a diameter of 64 mm — for use in areas that are limited by something.

Technical parameters

Endoscope (IS): external diameter 9.65 mm, working length 350 mm, field of view 30 degrees, lateral view 90 degrees in relation to the rod, quartz halogen lamp with a power of 10 W, eyecup, stainless steel rod, 1 m power cord.

Battery kit (ISBP): 6V. 3A-hour, lead/acid batteries, belt mount, weight 1.2 kg.

Battery Charger (ISTC): 6V, 110V or 230V AC input.

CEM Telescopic Handle: 350mm retracted and 1400mm extended, adjustable ball and clamp mirror mount, weight 519g.

USM Mirror Handle: 470mm long, 45 degree fixed mirror mount, splash-proof rubberized light with two D-cell batteries.

Convex mirror (SMC): diameter 140 mm, glass, in a polypropylene frame.

Small flat mirror (SML): diameter 64 mm, flat, in a polypropylene frame.

Rectangular mirror (SMR): 64 x 114 mm, flat, in a polypropylene frame.

When ordering, specify whether you need a 110V AC charger or 230V, i.e. SEMK/230.

Visual Search Kit

Comprehensive search kit for drug search and VU reconnaissance

Portable visual search kit for use by personnel engaged in intelligence work in the Armed Forces, customs, excise services and during crime scene investigations.

The kit includes a side-view endoscope for searching in inaccessible areas through 10mm diameter gaps. A halogen lamp (10W) located at the end of the endoscope provides bright illumination and allows for examination at distances of up to 1.5m. Power is supplied to the endoscope from a secondary socket located in the fluorescent lamp, also included in this kit.

The search mirrors include a model with a long telescopic handle extending up to 1400mm for investigating inaccessible areas such as in or above a container, and a model with a short fixed length handle best suited to searching inside a room. Each handle can be fitted with one of a range of interchangeable mirror heads supplied in the kit. Also included is a fluorescent hand-held illuminator to provide working light over a large working area and two right-angle lights that can be attached to a waist belt.

A range of miniature mirrors and light probes, as well as illuminated magnifying glasses, are included to assist with the internal examination of suspicious packages and containers with minimal impact on the object being examined. Mirror sizes range from 4.5mm in diameter.

A carrying case with a protective foam rubber lining is included.

The following mirrors are compatible with both UCM and CEM

The following light probes are compatible with the handle-container for batteries:

Mountable mirrors and other accessories for light probes with a diameter of 14mm:

Rigid endoscopes

Sectional search endoscope up to 3m long

A robust sectional endoscope, assembled to various lengths for internal inspection of deep, inaccessible recesses, without damaging property for entry and often to avoid moving heavy loads. Typical applications include inspection of culverts and loaded vehicles. Interchangeable heads allow a wide viewing angle both forward and to the sides, and good illumination levels and large diameter optics provide good image clarity.

The endoscope is supplied in seven sections: an eyecup, a forward-looking objective, a side-looking objective and four extension tubes with self-locking conical joints; all these sections can be assembled into tubes of various lengths up to 3 m. The endoscope kit is supplied in a robust, waterproof and shockproof, molded plastic carrying case (ABS material) and can be purchased with either a battery pack or a battery belt, which must be ordered separately.

Technical Parameters

SE30 endoscope, 30mm outer diameter; seven interconnectable sections providing lengths of 680, 1280, 2480 and 3080mm; stainless steel outer tube; 65 degree forward viewing angle; 45 degree side viewing angle; depth of field from 100mm to infinity; illumination with tungsten halogen lamps, 12V,

2 x 20W in forward-viewing head, 20W in side-viewing head; 3.5m power cord; case measuring 760 x 385 x 75mm, weight 12kg.

RBP battery pack, lead/acid, 12V. 8A-hours, with shoulder strap, 4.8 kg.

RBB Battery Belt, Lead/Acid Batteries, 12V, 8A-hours, with Belt, 4.8kg.

RBC Battery Charger, 12V, Adjustable Output, Powered by 110 or 230V AC.

Reconnaissance endoscope

A rugged and portable endoscope for general reconnaissance and search tasks. Easy to use and quickly ready to use. Ideal for rapid internal inspections of enclosed areas through an opening as small as 20mm. When fitted with a side view adapter, it is possible to see around corners and obstructions, i.e. from a safe position.

Constructed from 16 gauge stainless steel and protected by a waterproof and shockproof carrying case, the SE737 is designed to withstand adverse field conditions.

The SE737 is exceptionally tough and has been used by unit commanders operating in hostile environments throughout the UK and around the world.

• 50 degree field of view
• 510mm overall length
• field of view 50 degrees
• lateral angle of view 90 degrees
• outer diameter 19mm

Technical parameters

SE737 endoscope, diameter 19mm, length 510mm; field of view 50 degrees, depth of field from 40mm to infinity; front and side view with removable prismatic head — 90 degrees, 16-gauge stainless steel with nylon eyepiece; injection-molded polythene carrying case with screw-on waterproof lid and adjustable shoulder strap; case 600 x 45mm (diameter); 2kg; with spare head for side (90 degrees) viewing.

Rigid endoscopes — portable search kits

• diameter from 1 to 19 mm
• length from 90 to 1575 mm
• water and fuel resistant

A whole range of portable rigid endoscopes for search and inspection.

These endoscopes are mainly forward-looking, with a focusing eyepiece. For versatility, they are equipped with mirror bushings that provide a lateral view at an angle of 90 degrees.

Fluorescent illumination from the end of each endoscope is provided by an external light source (75W) connected to the endoscope via a fiber optic light guide. Kits are supplied

with a battery pack worn on the shoulder or belt. Both batteries, when fully charged, provide operation of the light source for 75 minutes.

Each kit is supplied in a foam-lined case.

The accessories include a camera adapter that can be used to connect any standard video camera, and two 90-degree eyepieces for use in tight spaces.

Technical Parameters

Endoscopes: forward viewing direction, 60-degree viewing angle, focusing eyepiece, stainless steel rod, ACMI type light guide connection

Mirror sleeve: 90-degree side view, rotatable, stainless steel, increases the endoscope diameter by 1 mm.

Light source: 12V, 75W, halogen lamp, fan cooling, aluminum housing, ACMI type fiber optic socket, belt clip, shoulder strap, 1m power cord.

Fiber optic fiber: 1.8m long, ACMI output, flexible twisted steel sheath, crush-resistant, with PVC coating.

Battery packaging: 12V, 8A-hours, sealed, lead/acid batteries, plastic case with handle and adjustable shoulder strap, 4.8kg.

Belt Battery: 12V, 8A-hour, lead/acid, adjustable belt length.

Charger: 12V, adjustable output, 110/120V or 220/240V AC input.

Ordering Information

Each kit comes with a forward viewing scope, side viewing mirror sleeve, shoulder strap light, fiber optic light guide, rechargeable battery, and charger, all housed in a protective, foam-lined carrying case.

Endoscopes can be supplied in various sizes and with a choice of the type of rechargeable battery (belt or with an adjustable shoulder strap).

When ordering, please specify whether a charger is required for 110V or 230V.

Accessories

Video camera adapter

This adapter allows you to attach an endoscope to the filter thread of a video camera lens. For the best image, it is recommended to use a lens with a focal length of 50 mm.

90 Degree Rotating Eyepieces

These eyepieces allow you to see straight into tight spaces and can rotate 360 ​​degrees. Available in 100mm and 350mm lengths.

Flexible search endoscopes

Portable search kits — flexible endoscopes with a tool for their insertion

• tip tilt in two directions
• protected from water and fuel
• diameter 7 mm
• lengths 580 or 890 mm

On the left picture: basic search kit with endoscope

Basic search kit with endoscope

A range of flexible endoscopes are available, each with a portable power source, battery pack and charger in a protective storage case.

Each endoscope has a flexible shaft with a minimum bending radius

equal to 45 mm and remote control of the peripheral tip, which can be deflected up and down up to 120 degrees. A side view adapter is provided, the attachment of which to the endoscope allows for improved internal viewing capabilities with this device. A compact light source is attached directly to the endoscope head using an efficient fiber optic connection, which ensures the transmission of bright illumination to the tip of the device.

The design of the endoscope ensures protection of the rod from water and fuel and provides the ability to inspect the internal volumes of fuel tanks. Kits can be supplied either with a belt battery or with a battery carried on a shoulder strap.

Technical parameters

Flexible endoscopes: diameter 7 mm, forward viewing, adapter screwed onto the tip for side viewing, head tilt up/down to 120 degrees, viewing angle 60 degrees, depth of field from 12 mm to infinity, focusing eyepiece, shaft bending radius 45 mm, stainless steel braid over urethane shaft, water and fuel resistant, operating temperature range from 0 to 60 degrees Celsius. Choice of length: 580 or 890 mm.

Light source (160-560): 12V, 12W, tungsten halogen lamp with lens tip, fan cooling, bayonet connection to the endoscope head, 1m power cord with XLR connector (3-pin).

Battery (RBP): 12V, 8A-hours, lead/acid batteries, 4.8 kg.

Battery Pack for Belt Carrying (RBB): 12V, 8A-hour, sealed lead/acid batteries, adjustable belt length, XLR connector (3-pin female), weight 4.5kg

Basic Battery Charger (RBC): 12V, adjustable output-input 110 or 230VAC.

Basic Search Kits with Endoscopes and their Nos. in the list

When ordering, please specify which charger is required — 110V or 230V AC.

Advanced search kits with endoscopes, including a tool for inserting endoscopes

A range of flexible endoscope kits are available, with the same features as the basic endoscope search kits listed on page 12, but with the addition of a range of tools to provide access to confined spaces.

The tools include a battery-powered, high-power impact drill, charger, 5, 10 and 12mm HSS drill bits, a 10mm x 400mm masonry drill bit, a floor penetration tool with a mallet and a car door penetration tool.

Text on the right picture: car door penetration tool

Floor penetration tool

A pointed stainless steel tube that can be driven between floorboards to facilitate underfloor inspections with an endoscope. Internal diameter 8mm.

Car door penetration tool

A tool to facilitate inspections of car door cavities using an endoscope. The cone-shaped rod can be pushed behind the window glass seal without destroying the door, allowing the endoscope to be freely inserted into the door along the formed access channel.

Channel width 8 mm

Advanced search kits with endoscopes, including a tool for inserting endoscopes

Spare parts and accessories

Portable search kits — flexible endoscopes with a hinged joint that allows tilting the endoscope tip in two directions

• tilting the tip in two directions
• protected from water and fuel
• diameter 6mm
• length up to 2.7m

A range of kits are available, comprising a portable light source (tungsten halogen lamp), battery and charger in a protective foam-lined carrying case.

The endoscopes are based on high-resolution fiber-optic image conductors; built-in fiber-optic illumination creates bright illumination; a tungsten halogen lamp (75W) is used as a light source. The endoscopes provide good visibility in all directions inside inaccessible cavities. The flexible rods of all these endoscopes have a minimum bending radius of 50 mm and an external tip with remote control, which can be tilted down and up by 120 degrees. The rod is also protected from water and fuel, which allows the endoscope to be used for inspections inside fuel tanks.

A range of flexible light tubes are also available for pre-setting the endoscope's direction, especially when lateral or vertical support is required. Other accessories include a video camera adapter, a 90-degree viewing adapter, and a tool for lining car doors and floors.

Technical Specifications

Flexible endoscope: diameter 6mm, forward view, head tilt up/down — 120 degrees, viewing angle 60 degrees, depth of field — from 10mm to infinity, focusing eyepiece, rod bending radius — 50mm, fiber optic image conductor with ACMI connector, urethane rod dressed in stainless steel braid, water and fuel protection, operating temperature from 0 to 60 degrees Celsius.

Choice by length: 1; 1.5; 2 and 2.7m

Light source (PLS75): 12V, 75W, tungsten halogen lamp, fan cooling, aluminum housing, ACMI connector for light guide, belt clip, adjustable shoulder strap, 1m power cord.

Battery Pack (RBP): 12V, 8A-hour, sealed lead/acid batteries, plastic case with handle and adjustable shoulder strap, 4.8kg.

Battery Belt Pack (RBB): 12V, 8A-hour, sealed lead/acid batteries, adjustable waist strap, 4.5kg.

Battery Charger (RBC): 12V, adjustable output, 110 or 230V AC input.

Standard Search Kits with Endoscopes — Part Numbers

When ordering, please specify whether the charger is 110V or 230V AC

Accessories: bendable light tubes

Spare parts and accessories

Video camera adapter

Allows you to connect the endoscope to the camera lens thread for screwing on the filter. For the best image, a lens with a focal length of 50mm is recommended.

Side view adapter

The 90 degree viewing adapter screws onto the end of the endoscope to improve 360 ​​degree viewing capability.

Portable search kits — flexible endoscopes with a hinged joint that allows tilting the endoscope tip in four directions

• tip tilt in four directions
• water and fuel resistant
• diameter 8mm
• length up to 3m

These endoscopes use high-resolution fiber optic image guides, a minimum bending radius of 65 mm, a built-in fiber optic illuminator, and a remotely controlled tip that can be swiveled 120 degrees up and down and 90 degrees left and right. Bright illumination is provided by a battery-powered 75W tungsten halogen lamp.

The high degree of flexibility of the endoscope tip, provided remotely, allows for complex maneuvering in hard-to-reach areas to ensure a good view in all directions. The flexible shaft is also protected against water and fuel, and is suitable for inspecting fuel tanks.

Side-viewing head

This is a screw-on side view head that provides a 90 degree view of the front view as well as a side view. Compatible with all search endoscopes listed on page 14.

Standard kits — 33 as per list

All these kits contain a flexible endoscope, a light source (75W tungsten halogen lamp), a battery and a charger, all housed in a protective, foam-lined carrying case. Kits are supplied with either a battery on a waist strap or a battery on a shoulder strap.

When ordering, please specify which charger is required — 110 or 230 V AC

Technical parameters

Flexible endoscope: choice of lengths: 1; 1.5; 2 and 3. m

All models: 8mm diameter, 65mm bending radius of the rod, four-way tilt of the tip (120 degrees up and down and 90 degrees left and right), 6.0 degree forward field of view, 4mm minimum focus, focusing eyepiece, fiber optic light guide with ACMI connector, stainless steel braid around the urethane rod, water and fuel protection, operating temperature from -10 to +80 degrees Celsius.

Light source (9PLS75): 12V, 75W, fan-cooled tungsten halogen lamp, aluminum housing, ACMI connector for the light guide, belt clip, adjustable shoulder strap, 1m power cord.

Battery Pack (9RBP): 12V, 8A-hour, sealed lead acid batteries, plastic case with handle and adjustable shoulder strap, 4.8 kg.

Battery Belt (RBB): 12V, 8A-hour, sealed lead acid batteries, adjustable belt length, 4.5 kg.

Charger (RBC): 12V, adjustable output, 110 or 230 VAC input.

An optional video camera adapter is available to connect the endoscope to a closed-circuit television system and a VCR. A wide range of video equipment is available and the company will be happy to advise on purchasing equipment in accordance with the specific application.

Contraband Detector

Detects:

• Drugs
• Explosives
• Firearms
• False Panels

• Easy to use
• Safe source of radioactivity (10μCi)
• Quick receipt results
• easy calibration
• reliability
• non-destructive testing

A contraband detector is a portable, lightweight device that indicates the presence of hidden materials by signaling unexpected changes in density or surface thickness. For example, an “empty” cylinder filled with air will give a lower reading than a cylinder filled with drugs.

When operating, the detector emits a stream of energy into the object being tested and measures the backscatter. A full space reflects more energy than an empty space. As the detector moves across the surface of the object, the measured

backscatter is displayed on the LCD (digital readout) and gives an alarm if the count changes.

Place the detector anywhere on the surface of the object and hold it for 2 seconds until a “normal” count is registered. Move the contraband detector across the surface of the object and any changes in density will trigger an alarm.

Typical Applications

Tires Compare the readings on a “clean” tire with those on a “suspect” tire.

Car Doors Normalize the readings in the center of the door with the window up. As the detector moves along the door, changes in the signal will indicate the presence of the frame, the window motor, and any hidden contraband.

Fuel Tanks Normalize the detector at the bottom of the tank and observe changes in indication or alarms as the detector moves. Fuel level will also cause a change in signal as it moves along the side of the tank.

Cargo Containers Check the walls for hidden cavities, examine cross-sections that may contain contraband.

Universal calibration anywhere

All devices are released calibrated in accordance with current standards. A serial secondary calibration block is supplied with each detector to enable calibration in real-world conditions.

The reliability of the device is ensured by built-in self-diagnostics

The built-in self-diagnostics program allows the user to check the operation of the microprocessor and indicator.

The detector looks under the surface

The detector uses a gamma ray beam to analyze the density or thickness of a surface and can work with wood, metal, fabric, plastic, etc. Since each material has a corresponding density, unexpected changes become obvious. With the exception of photo and X-ray films, the gamma rays used do not damage the objects being examined.

These devices are widely used throughout the world in the fight against drugs.

Technical parameters

Contraband Detection Kit

Contraband Detection Kit with Density Detector and Endoscopes

• Contraband Detector
• Flexible endoscope with built-in light source
• Tools for opening doors and floors
• Ultrasonic distance finder
• Search mirror with telescopic handle and illuminator
• Wear-resistant case

The contraband detector provides rapid detection of any hidden material. It detects differences in thickness or density of materials by sending a beam of gamma rays across the surface being monitored and measures the backscattering. A filled space reflects more energy than an empty space and the signal increases. As the detector moves across the surface the signal is continuously indicated and any change triggers an acoustic alarm. This detector is ideal for detecting hidden drugs, explosives, currency or weapons in car doors, fuel tanks or in cavities behind container walls.

The flexible endoscope allows visual inspection behind panels and inside hidden volumes through any openings with a diameter of 6 mm. The endoscope is equipped with a rotating peripheral tip and a halogen light source, which is conveniently located inside the handle, and a belt with a rechargeable battery. The endoscope rod is resistant to fuel and is suitable for viewing fuel tanks.

An accessory to the endoscope is the vehicle floor and door penetration tool. The floor penetration tool is passed between the floor slabs and allows the endoscope to be inserted into the central opening to provide viewing under the floor. The door penetration tool can be inserted through the rubber window seal without causing damage. The endoscope is then inserted into the door through a channel in the tool.

The ultrasonic distance gauge allows convenient measurement of the internal dimensions of containers to determine the presence of false walls.

The 350mm side view endoscope is ideal for inspection through 10mm diameter openings. The bright 10W tungsten halogen lamp at the end of the endoscope allows inspections to be made at distances of over 1.5m. Power is supplied by a pack of rechargeable batteries.

The search mirror with telescopic handle and illuminator provides a convenient way to view hard to reach places on ships and in buildings, under cars, on the roof of containers, in holds, behind panels, in roof and ceiling voids.

The mirror handle extends to 1400 mm and folds down to 350 mm. It comes with two screw-on mirrors: a convex mirror with a diameter of 140 mm and a flat mirror with a diameter of 64 mm. Each mirror has a protective rubber frame.

Three different sets are available, each supplied in a durable aluminum storage case.

Technical Parameters

Contraband Detector: Material Thickness Detector, Effective Range Changes to 178 mm. Gamma Ray Source — Barium 133, 10 μCi (Ci is Curie), Detector — Cadmium Telluride.

Flexible endoscope: 6mm diameter, forward viewing, side viewing adapter, tip rotation up/down 120 degrees, field of view 60 degrees, depth of field — from 10mm to infinity, focusing eyepiece, shaft bending radius 50mm, stainless steel braid over urethane shell, water and fuel resistant, operating temperature from 0 to 60 degrees Celsius, length 1m, equipped with a halogen light source located in the handle.

Ultrasonic distance determinator: range from 0.5 to 18 m, accuracy — no worse than 99% of the entire scale.

Search mirror with telescopic handle: 350 mm in the retracted state and 1400 mm in the extended state, holder — ball or sleeve, adjustable, coupled rubberized light source on 2D batteries, convex mirror with a diameter of 140 mm in a rubber frame, flat mirror with a diameter of 64 mm in a rubber frame.

Rigid endoscope: diameter 9.65 mm, working length 350 mm, lateral view, field of view 30 degrees, 10-watt quartz halogen lamp is located in the peripheral tip, stainless steel channel, power cord 1 m long.

Rechargeable batteries: 12-volt, rechargeable, battery belt, AC charger 110V or 230V.

Accessories: tool for penetrating the floor and doors of the car.

Non-linearity detector (NLJD)

NLJD is used to detect electronic circuits found in both home-made VUs and radio transmitters.

Most modern electronic circuits contain semiconductors, which are nonlinear connections. A detector can detect them by emitting a very high frequency signal, which excites the nonlinear connection and this connection emits another signal, different in frequency. The detector, containing a highly sensitive receiver capable of receiving this frequency, indicates the proximity of the electronic circuit by giving an audible alarm.

The detector consists of a control unit, which contains a battery and is carried by the user on a belt or on an attached shoulder strap. The control unit also contains a loudspeaker, which gives an alarm signal, but for secrecy headphones (included) can be used.

The antenna probe, which contains the receiver and transmitter, extends from 300 to 800 mm, so that the operator can conduct the survey at floor level (without bending). A soft rubber-plastic cover protects both the antenna and the surfaces to be scanned from damage.

The device is provided with a printed circuit board with four diodes as a reference standard for checking the functionality.

All products are supplied in a robust carrying case with a rubber-plastic lining.

An optional external battery can be supplied to extend the life of the device if necessary.

On the left picture: an example of a response to a threat — a store inspection in search of arson devices.

Typical examples of NLJD use are as follows:

VIP protection support

NLJD can be used to search for eavesdropping devices and electronic homemade explosive devices in anticipation of a VIP visit.

Response to a threat

Can be used to survey large areas where devices can be hidden anywhere, such as incendiary devices in hardware stores or conference rooms.

Post-incident surveys

Because semiconductors can be detected even when not powered, NLJD can be used to locate circuit parts after an incident to provide forensic evidence or for research purposes regarding the origin of the device.

Weight parameters and dimensions:

X-ray Systems

Portable X-ray Systems

Viewing System

• Real-time operation
• 1000 image database
• Pseudo color
• Zoom and image enhancement
• Light weight
• User friendly
• Quick installation

X-ray generator

• Very light weight
• Portable
• High power
• Low dosage
• Easy to use

Compact portable X-ray generator and real-time viewing system used for inspection of suspicious packages. X-ray generator can be supplied separately.

Viewing system

It includes a video camera unit that is placed behind the suspect package to produce an X-ray image, which is then transmitted via a 50m cable to a powerful laptop computer for viewing. The system is very easy to set up and use, and can be powered by the included battery for up to two hours between charges.

Image Enhancement Allows the user to increase the contrast and sharpness of the image so that previously unrecognizable parts can be identified. This feature is especially useful in determining the design of homemade explosive devices.

Zoom The image area can be enlarged from 30 to 250%.

Pseudo-Color Image Allows the addition of artificial colors to the image, which helps to differentiate between the composition of the packaging — metal, electronics, explosive devices or drugs.

Measurements The items displayed on the screen can be measured.

Database Images can be stored in the computer database and recalled later. In addition, the screen can be divided so that multiple images can be displayed simultaneously. A fax/modem card can be added to transmit images to any point on the globe.

The entire system is supplied in a carrying case that can be easily carried by one person and contains the X-ray generator (Part No. 600-379).

X-ray generator

A very compact, high power X-ray generator which can be used independently, with Polaroid film or with a real time viewing system (List No. 600-378).

This generator is very easy to use. The operator only has to set the number of X-ray pulses to be generated and sets a delay time of 15 to 60 seconds to move away from the generator before it starts emitting. The number of pulses can be set between 3 and 297 with a nominal generation rate of 10 pulses per second.

The product is powered by an internal Ni-Cad battery, which fully charges in 1 hour using the supplied external charger.

Viewing system

X-Ray Generator